Click to Print This Page

Digital Projection Logo

Specification Sheet


E-Vision 6900 WUXGA White (Preliminary)

5,750 ANSI / 6,500 ISO Lumens | Contrast Ratio: 2,000:1 (Dynamic Black) 1,000:1 native | Part Number: 118-045

5,750 ANSI / 6,500 ISO Lumens | Contrast Ratio: 2,000:1 (Dynamic Black) 1,000:1 native | Part Number: 118-045

Colour System: DMD Specification:
4-segment (RGBW) colour wheel for high brightness (as standard)

6-segment (RGBCMY) colour wheel for enhanced colour (optional extra)

Display Type:
1 x 0.67" DarkChip™ DMD™
1920 x 1200 pixels native.
Fast transit pixels for smooth greyscale and improved contrast.
Aspect Ratio:
16x10
Fill Factor
87%

Key Features

Video & Graphics Processing

  • HDMI 1.4a for Side by Side, Frame Packing, Frame Sequential and Top Bottom 3D formats.

  • Dual and Triple Flash Processing can be used to multiply the displayed frame rate for 24p 3D sources.

  • Synchronisation of active glasses.

  • 24p and 1080p native display.


Geometry Correction

  • Horizontal & Vertical Keystone.

  • Scaling for fixed aspect ratio screens.


HDBaseT® Interface

  • Built in support for reception of uncompressed High Definition Video over standard CAT5e/6 LAN cable.

  • Allows the projector to be placed up to 100m from the source with low cost cabling.


Colour Processing

  • Powerful colour correction for accurate colour matching.


Projector Controller Software

  • Intuitive user interface for network control.

  • Simultaneous control of user-defined groups of projectors.

  • At-a-glance monitoring of projector status.

Source Compatibility:
HDMI including Deep Color™ processing.
Graphics standards up to 1920 x 1200 resolution at 60Hz via HDMI, DVI-D, HDBaseT or VGA
Component Video (SD and HD) via RGBHV.

Inputs/Outputs

 Video & Computer

Type

Connector

Qty

DVI-D 1.0
HDMI 1.4a
VGA / Analog RGB
Monitor Out
Component Video
HDBaseT (see LAN)
DVI
HDMI
15-pin D-Sub
15-pin D-Sub
5 x BNC
RJ45
1
2
1
1
1
1
 Communication & Control

Type

Connector

Qty

3D Sync In
3D Sync Out
LAN
RS232
Wired Remote
12V Trigger
Service Port

NOTE: The LAN port is shared with HDBase-T.
BNC
BNC
RJ45
9-pin D Sub
3.5mm Stereo Jack
3.5mm Stereo Jack
USB Type B
1
1
1
1
1
1
1

 

3D Formats Supported
HDTV Formats Supported
Frame Packing
Frame Sequential
Side by Side (half)
Top and Bottom
1080p (24Hz, 25Hz, 30Hz, 50Hz, 60Hz)
1080i (50Hz, 60Hz)
720p (50, 60Hz)
Computer Compatibility Bandwidth
Up to 1920 x 1200 165 MHz on analog RGB
165 Megapixels per second on HDMI
Remote Control Automation Control
Addressable IR Remote Control, wireless and wired.
On-board keypad.
Crestron RoomView® Connected
LAN
RS232
AMX (Device Discovery)
Served web page
Colour Temperature Operation
5400 to 9300K
illumination Type
Typical illumination Life
2 x 300W Normal Mode: 3000 hours
Eco Mode : 4000 hours
Lenses

Lens

Part No.

Focus Range

Lens Shift

0.38 :1 fixed 117-341 0.68m - 2.44m Depends on image size, see Installation Guide.
0.75 - 0.93 :1 zoom 115-339 1.02m - 12.7m Vert: 0.5 (U) 0.3 (D) frame, Hor: 0.1(L) 0.2 (R) frame
0.76 :1 fixed 112-499 0.81m - 5.08m none
1.25 - 1.79 :1 zoom 112-500 1.33m - 11.73m Vert: 0.5 (U) 0.3 (D) frame, Hor: 0.1(L) 0.2 (R) frame
1.73 - 2.27 :1 zoom 112-501 1.83m - 14.9m Vert: 0.5 (U) 0.3 (D) frame, Hor: 0.1(L) 0.2 (R) frame
2.22 - 3.67 :1 zoom 112-502 2.36m - 24.2m Vert: 0.5 (U) 0.3 (D) frame, Hor: 0.1(L) 0.2 (R) frame
3.58 - 5.38 :1 zoom 112-503 3.8m - 35.35m Vert: 0.5 (U) 0.3 (D) frame, Hor: 0.1(L) 0.2 (R) frame
5.31 - 8.26 :1 zoom 112-504 5.59m - 54.8m Vert: 0.5 (U) 0.3 (D) frame, Hor: 0.1(L) 0.2 (R) frame
Lens Mount

Motorised and programmable shift, zoom and focus.
Intelligent Lens Memory with 10 user-definable preset positions (except UST lens).

Mechanical Mounting  
Front/Rear Table
Front/Rear Ceiling
Adjustable Front/Rear Feet
 
Power Requirements Power Consumption
100-240VAC 50/60Hz single phase Typical 693W @ 220VAC in Normal mode
Typical 554W @ 220VAC in ECO mode
Typical 724W @ 110VAC in Normal mode
Typical 574W @ 110VAC in ECO modeW
Thermal Dissipation
Fan Noise
Typical 2378 BTU/Hour @ 220VAC in Normal mode
Typical 1901 BTU/Hour @ 220VAC in ECO mode
Typical 2484 BTU/Hour @ 110VAC in Normal mode
Typical 1969 BTU/Hour @ 110VAC in ECO mode BTU/Hour
Normal mode: 38 dBA max, 36 dBA typical
Eco mode: 32 dBA max, 30dBA typical
Operating/Storage Temperature
Operating Humidity
Operating: 5 to 40C (41 to 104F)
Operating: 40 to 45 C (104 to 113F) with reduced light output.
Storage: -20 to 60C (-4 to 140F)
10% to 85%, relative, non-condensing
Weight (Chassis Only)
Dimensions
20 kg
44.1 lb
L: 46.5cm W: 51.0cm H: 21.6cm
L: 18.3in W: 20.1in H: 8.5in
Safety & EMC Regulations
 
CE, CB, FCC Class B, UL / cUL, CCC, CECP, RoHS
IEC EN 62471-5 RG2 (with std lens)
 
Accessories
Accessory Part No.
Infrared Remote (replacement)
Replacement Lamp (single, requires 2 per projector)
Replacement Filter Module (requires one per projector)
6-segment (RGBCMY) colour wheel (enhanced colour)
117-780
118-047
118-046
118-452

*Dimensions included for reference only and are subject to change. Please download the full set of CAD files for this display for more accurate information.

 

Downloads  

PDF CAD Drawings

AUTOCAD Drawings

User Guides

User Guides (German)

User Guides (French)

Important Information

Important Information

Control Protocol

Ultra Short Throw Lens

Ultra Short Throw Lens Installation Manual

 


Specifications subject to change without notice. ©2016 Digital Projection.
DLP®, Digital Light Processing™ and DMD are trademarks of Texas Instruments, Inc


map

DIGITAL PROJECTION, INC 55 CHASTAIN ROAD, SUITE 115 KENNESAW, GA. 30144
T: 770.420.1350 } F: 770.420.1360 | www.digitalprojection.com

DIGITAL PROJECTION, LTD GREENSIDE WAY, MIDDLETON MANCHESTER, UK. M24 1XX
T: +44.161.947.3300 | F: +44.161.684.7674 | www.digitalprojection.co.uk

DIGITAL PROJECTION, CHINA Rm A2006,ShaoYaoJu 101 North lane, Shi AO International Center, Chao Yang District, Beijing, 100029,PR CHINA
T: +86.10.58239771 | F: +86 10 58239770

DIGITAL PROJECTION, ASIA 16 NEW INDUSTRIAL ROAD, #02-10 HUDSON TECHNOCENTRE SINGAPORE 536204
T: +65.6284.1138 | F: +65.6284.1238