Click to Print This Page

Digital Projection Logo

Specification Sheet


M-Vision 930 WUXGA 3D

12,000 Lumens | Contrast Ratio: 5,000:1 (Dynamic Black) 2,000:1 native | Part Number: 114-259

12,000 Lumens | Contrast Ratio: 5,000:1 (Dynamic Black) 2,000:1 native | Part Number: 114-259

Colour System: DMD Specification:
6 Segment RGBYCW Colour Wheel

Display Type:
1 x 0.96" DarkChip™ DMD™
1920 x 1200 pixels native, +/- 12° tilt angle
Fast transit pixels for smooth greyscale and improved contrast.
Aspect Ratio:
16x10
Fill Factor
87%

Key Features

Video & Graphics Processing

  • HDMI 1.4 for Side by Side, Frame Packing & Top Bottom Formats.

  • Dual Flash Processing can be used to multiply the displayed frame rate for 3D sources (example 144Hz display).

  • Dual Pipe Processing: Two sources in parallel for Left and Right Eyes.

  • Synchronisation of active glasses, DLP® Link™ glasses or polarising switcher.

  • High Bandwidth Digital & Analog Receiver with 10 Bit A-D.

  • The projector automatically detects interlaced video and implements 3:2 or 2:2 extraction as appropriate, with pixel based, motion adaptive interpolation and auto cadence correction.

  • 24p and 1080p native display.


Geometry Correction

  • Non-linear Warp adjustment by moving points on an interpolated grid.

  • Cornerstone, Vertical & Horizontal Keystone, Pincushion & Barrel, and Image Rotation.

  • Blanking control for custom input window sizing.


Edge Blending

  • Correction for non-active pixels at the edge of the display.


HDBaseT® Interface

  • Built in support for transmission of uncompressed High Definition Video over standard CAT5e/6 LAN cable.

  • Allows projector to be placed up to 80m from source with low cost cabling.


Projector Controller Software

  • Intuitive user interface for network control

  • Simultaneous control of user-defined groups of projectors

  • At-a-glance monitoring of projector status

  • Warp control.


Source Compatibility:
HDMI including Deep Color™ processing and 3D standards.
Dual Link DVI accepts graphics standards up to 1920 x 1200 at 120Hz.
Graphics standards up to 1920 x 1200 resolution at via DVI, HDMI or VGA.
Component Video (SD and HD) via YPrPb or RGB.

Inputs/Outputs

 Video & Computer

Type

Connector

Qty

HDMI 1.4
DVI - Dual Link DVI-D
HDBaseT
VGA
Component Video
Component Video
HDMI
DVI
RJ45
15-pin D-Sub
3 x BNC
3 x RCA
2
1
1
1
1
1
 Communication & Control

Type

Connector

Qty

3D Sync Out
3D Sync In
LAN
RS232
IR Input
12V Trigger
Service Port

NOTE: The LAN port is shared with HDBase-T.
BNC
BNC
RJ45
9-pin D Sub
3.5mm Stereo Jack
3.5mm Stereo Jack
USB Type A
1
1
1
1
1
2
1

 

3D Formats Supported
HDTV Formats Supported
Frame Packing
Dual Pipe
Frame Sequential
Side By Side (half)
Top and Bottom
1080p (23.98Hz, 24Hz, 25Hz, 29.97Hz, 30Hz, 50Hz, 59.94Hz, 60Hz), 1080i (50Hz, 59.94Hz, 60Hz), 720p (50Hz, 59.94Hz, 60Hz)
Computer Compatibility Bandwidth
Up to 1920 x 1200 170 MHz on analog RGB
165 Megapixels per second on HDMI and DVI
297 Megapixels per second on Dual Link DVI
Remote Control Automation Control
IR Remote Control
On-Board keypad
LAN
RS232
Colour Temperature Operation
User selectable from 5400 to 9300K
illumination Type
Typical illumination Life
2 x 465W High Intensity Discharge 1500 hours
Lenses

Lens

Part No.

Optimised Focus Range*

Lens Shift

0.84 - 1.03 : 1 zoom 114-313 1.5m - 10m Vert: 0.37 (U) 0.37 (D) frame, Hor: 0.12 (L) 0.12 (R) frame
1.56 - 1.86 : 1 zoom 114-314 2m - 12.4m Vert: 0.5 (U) 0.5 (D) frame, Hor: 0.15 (L) 0.15 (R) frame
1.85 - 2.40 : 1 zoom 114-315 2.5m - 15.9m Vert: 0.5 (U) 0.5 (D) frame, Hor: 0.15 (L) 0.15 (R) frame
2.40 - 4.00 : 1 zoom 114-316 4m - 26.6m Vert: 0.5 (U) 0.5 (D) frame, Hor: 0.15 (L) 0.15 (R) frame
4.00 - 7.00 : 1 zoom 117-463 4m - 42m Vert: 0.5 (U) 0.5 (D) frame, Hor: 0.15 (L) 0.15 (R) frame

* Lens focal ranges above are the optimised distances but are likely to focus further, please contact your RSM for more details.

Lens Mount

Motorised shift, zoom and focus.

Mechanical Mounting Orientation
Front/Rear Table
Front/Rear Ceiling
Adjustable Front/Rear Feet
Table Top or Inverted: Yes
Pointing Up:        Yes
Pointing Down:   Yes
Roll (Portrait):      +/-10° from horizontal
Power Requirements Power Consumption
100 - 240VAC 50/60Hz single phase 1200W
Thermal Dissipation
Fan Noise
3771 BTU/Hour 48 dBA
Operating/Storage Temperature
Operating Humidity
Operating: 0 to 35C (32 to 95F)
Storage: -20 to 60C (-4 to 140F)
20% to 90% non-condensing
Weight (Chassis Only)
Dimensions
28.6 kg
63.1 lb
L: 63.2 cm W:50 cm H:24 cm
L: 24.9 in W:19.7 in H:9.4 in
Safety & EMC Regulations
 
CE, FCC Class A , UL, CCC  
Accessories
Accessory Part No.
M-Vision 930 3D Lamp & Housing
Infrared Remote (replacement)
Replacement Filter Set
114-318
115-758
114-520

 


*Dimensions included for reference only and are subject to change. Please download the full set of CAD files for this display for more accurate information.

Downloads  

PDF CAD Drawings

AUTOCAD Drawings

User Guides

Important Information

Control Protocol

Projector Controller Software 4.4    User Guide


Specifications subject to change without notice. ©2018 Digital Projection.
DLP®, Digital Light Processing™ and DMD are trademarks of Texas Instruments, Inc


map

DIGITAL PROJECTION, LTD GREENSIDE WAY, MIDDLETON MANCHESTER, UK. M24 1XX
T: +44.161.947.3300 | F: +44.161.684.7674 | www.digitalprojection.co.uk

DIGITAL PROJECTION, INC 55 CHASTAIN ROAD, SUITE 115 KENNESAW, GA. 30144
T: 770.420.1350 } F: 770.420.1360 | www.digitalprojection.com

DIGITAL PROJECTION, CHINA Rm A2301,Shaoyaoju 101 North Lane,Shi Ao International Center,Chaoyang District,Beijing 100029,PR China
T: +86.10.58239771 | F: +86 10 58239770

DIGITAL PROJECTION, ASIA 16 NEW INDUSTRIAL ROAD, #02-10 HUDSON TECHNOCENTRE SINGAPORE 536204
T: +65.6284.1138 | F: +65.6284.1238