Click to Print This Page

Digital Projection Logo

Specification Sheet


Titan Quad WUXGA 3D

16,000 Lumens | Contrast Ratio: 2,000:1 | Part Number: 111-875

16,000 Lumens | Contrast Ratio: 2,000:1 | Part Number: 111-875

Colour System: DMD Specification:
3-chip DLP®

Display Type:
3 x 0.96" DarkChip™ DMD™
1920 x 1200 pixels native, +/- 12° tilt angle
Fast transit pixels for smooth greyscale and improved contrast.
Aspect Ratio:
16x10
Fill Factor
87%

Key Features

Standard Inputs (1-8): Front End Video Capabilities


Video & Graphics Processing

  • High bandwidth digital & analog receiver with 10 bit A-D.

  • Automatic detection of interlaced video and implementation of 3:2 or 2:2 extraction as appropriate, with pixel based, motion adaptive interpolation and auto cadence correction.

  • Displayed image frame locked to input with as low as 1 frame total latency.

  • 24p and 1080p native display.

  • Image enhancement for MPEG, Mosquito noise & color transients in composite sources.



Geometry Correction

  • Cornerstone, Vertical & Horizontal Keystone, Pincushion & Barrel, and Image Rotation.

  • Non-linear Warp adjustment by moving points on an interpolated grid.



Edge Blending

  • Semi-automated multi projector tiling

  • Correction for non-active pixels at the edge of the display.


Super Image Clarity

  • Geometry correction and Edge Blending implemented in single stage process, retaining maximum image resolution.



Picture in Picture

  • Two sources can be displayed either one within the other (PIP), or side by side, with original aspect ratios maintained.



ColorMax™

  • Accurate matching of projectors in tiled or blended applications.

  • User selection and storage of primary and secondary color targets.



High Bandwidth Inputs (9-11): Bypassing Front End for Minimal Latency


  • Pixel mapped to the display.

  • Dual Link DVI accepts frame rates up to 160Hz with latency as low as 1 frame.

  • HDMI 1.4 for Side by Side, Frame Packing & Top Bottom formats.

  • Dual Flash Processing can be used to multiply the displayed frame rate for 3D sources (example 144Hz display).

  • FastFrame™ Smear Reduction.

  • Dual Pipe processing: two sources in parallel for left and right eyes.

  • Synchronisation of active glasses or polarising switcher.


Projector Controller Software


  • Intuitive user interface for network control

  • Simultaneous control of user-defined groups of projectors

  • At-a-glance monitoring of projector status

Source Compatibility:
3GSDI is SMPTE 292M, SMPTE 259M-C and SMPTE 424M compliant.
HDMI and DVI include Deep Color™ processing up to 36 bit.
DVI inputs are HDMI compatible.
Digital Audio Extraction via SPDIF for HDMI sources.
Graphics standards up to 1920 x 1200 at 60Hz via DVI or VGA.
Component Video (SD and HD) via YPrPb, RGB or RGBS.
S-Video (PAL, NTSC & SECAM)
Composite Video (PAL, NTSC & SECAM)

High Bandwidth, Pixel Mapped Path:
Dual DVI accepts graphics standards up to 1920 x 1200 at 120Hz.
HDMI 1.4 including 3D Standards
Dual Pipe (2 x DVI)

Inputs/Outputs

 Video & Computer

Type

Connector

Qty

DVI-D / DVI-A
HDMI 1.3
3G-SDI
VGA / Analog RGB
Component Video
S-Video
Composite Video
Composite Video

High Bandwidth Ports
Main - Dual Link DVI-D
Sub - HDMI 1.4

Audio
SPDIF Digital Output
DVI-I
HDMI
BNC
15-pin D-Sub
4 x BNC
4-pin Mini DIN
RCA
BNC


DVI-I
DVI-I


RCA
1
1
1
1
1
1
1
1


1
1


1
 Communication & Control

Type

Connector

Qty

3D Sync Out
3D Sync In
LAN
RS232
Wired Remote In
Wired Remote Out
Update Port
Service Port
BNC
BNC
RJ45
9-pin D Sub
3.5mm Stereo Jack
3.5mm Stereo Jack
RJ45
USB Type B
1
1
1
1
1
1
1
1

 

3D Formats Supported
HDTV Formats Supported
Frame Packing
Dual Pipe
Frame Sequential
Side By Side (half)
Top and Bottom
1080p (23.98Hz, 24Hz, 25Hz, 29.97Hz, 30Hz, 50Hz, 59.94Hz, 60Hz), 1080i (50Hz, 59.94Hz, 60Hz), 1080sf (23.98Hz, 24Hz), 720p (50Hz, 59.94Hz, 60Hz)
Computer Compatibility Bandwidth
Up to 1920 x 1200 170 MHz on analog RGB
165 Megapixels per second on HDMI and DVI
297 Megapixels per second on Dual Link DVI
Remote Control Automation Control
Addressable IR remote control, wireless and wired with loop-through.
On-Board invertable keypad
RS232
LAN
Colour Temperature Operation
User selectable from 3200 to 9000K
illumination Type
Typical illumination Life
4 x 400W High Intensity Discharge Full Power: 1500 hours (up to 6000 hours in lamp sequential mode)

Eco Mode : 2000 hours (up to 8000 hours in lamp sequential mode)
Lenses

Lens

Part No.

Focus Range

Lens Shift

0.67:1 fixed HB 105-607 1.1m - 10m Vert: 0.108 (U) 0.108 (D) frame, Hor: 0.044 (L) 0.044 (R) frame
1.12:1 fixed HB 105-608 3m - 15m Vert: 0.567 (U) 0.45 (D) frame, Hor: 0.188 (L) 0.188 (R) frame
1.12:1 (short) fixed HB 105-609 1.2m - 2m Vert: 0.567 (U) 0.45 (D) frame, Hor: 0.188 (L) 0.188 (R) frame
1.16 - 1.49:1 zoom HB 109-236 3m - 15m Vert: 0.408 (U) 0.408 (D) frame, Hor: 0.188 (L) 0.188 (R) frame
1.39 - 1.87:1 zoom HB 105-610 4m - 24m Vert: 0.567 (U) 0.45 (D) frame, Hor: 0.188 (L) 0.188 (R) frame
1.87 - 2.56:1 zoom HB 105-611 4m - 24m Vert: 0.567 (U) 0.45 (D) frame, Hor: 0.188 (L) 0.188 (R) frame
2.56 - 4.16:1 zoom HB 105-612 9.1m - 45m Vert: 0.567 (U) 0.45 (D) frame, Hor: 0.188 (L) 0.188 (R) frame
4.16 - 6.96:1 zoom HB 105-613 12m - 80m Vert: 0.567 (U) 0.45 (D) frame, Hor: 0.188 (L) 0.188 (R) frame
6.92 - 10.36:1 zoom HB 109-235 12m - 80m Vert: 0.567 (U) 0.45 (D) frame, Hor: 0.188 (L) 0.188 (R) frame
Lens Mount

Motorised and programmable shift, zoom and focus. Intelligent Lens Memory with 5 user-definable preset positions.

Mechanical Mounting Orientation
Front/Rear Table
Front/Rear Ceiling
Adjustable Front/Rear Feet
Rugged, staging tolerant chassis with integrated handles.
Optional RapidRig™ frame with integrated pitch, roll and yaw adjustments.
Table Top or Inverted: Yes
Pointing Up:        Yes - special software required.
Pointing Down:   No
Roll (Portrait):      No
Power Requirements Power Consumption
200-240VAC 50/60Hz single phase 2100W
Thermal Dissipation
Fan Noise
7165 BTU/Hour 48 dBA
Operating/Storage Temperature
Operating Humidity
Operating: 0 to 40C (32 to 104F)
Storage: -10 to 50C (14 to 122F)
20 to 80% non-condensing
Weight (Chassis Only)
Dimensions
39 kg
86.0 lb
L: 68.8 cm W: 58.5 cm H: 25.8 cm
L: 27.1 in W: 23.1 in H: 10.2 in
Safety & EMC Regulations
 
CE, FCC Class A, CCC  
Accessories
Accessory Part No.
Titan Quad Lamp & Housing
RapidRig™ Frame
Infrared Remote (Replacement)
111-896
111-265
105-023

 


*Dimensions included for reference only and are subject to change. Please download the full set of CAD files for this display for more accurate information.

Downloads  

PDF CAD Drawings

AUTOCAD Drawings

Rigging Frame CAD Drawings

Lens CAD Drawings

User Guides

Important Information

Legacy Control Protocol

Control Protocol

Warp Generator Software

.NET Framework

Network Discovery Software

Projector Controller Software 4.4    User Guide


Specifications subject to change without notice. ©2016 Digital Projection.
DLP®, Digital Light Processing™ and DMD are trademarks of Texas Instruments, Inc


map

DIGITAL PROJECTION, LTD GREENSIDE WAY, MIDDLETON MANCHESTER, UK. M24 1XX
T: +44.161.947.3300 | F: +44.161.684.7674 | www.digitalprojection.co.uk

DIGITAL PROJECTION, INC 55 CHASTAIN ROAD, SUITE 115 KENNESAW, GA. 30144
T: 770.420.1350 } F: 770.420.1360 | www.digitalprojection.com

DIGITAL PROJECTION, CHINA Rm A2006,ShaoYaoJu 101 North lane, Shi AO International Center, Chao Yang District, Beijing, 100029,PR CHINA
T: +86.10.58239771 | F: +86 10 58239770

DIGITAL PROJECTION, ASIA 16 NEW INDUSTRIAL ROAD, #02-10 HUDSON TECHNOCENTRE SINGAPORE 536204
T: +65.6284.1138 | F: +65.6284.1238