Click to Print This Page

Digital Projection Logo

Specification Sheet


E-Vision Laser 8500 WUXGA Black

8,500 Lumens | Contrast Ratio: 10,000:1 (Dynamic Black)1,800:1 native | Part Number: 119-024

8,500 Lumens | Contrast Ratio: 10,000:1 (Dynamic Black)1,800:1 native | Part Number: 119-024

Colour System: DMD Specification:
Laser Phosphor

Display Type:
1 x 0.67" DarkChip™ DMD™
1920 x 1200 pixels native, +/- 12° tilt angle
Fast transit pixels for smooth greyscale and improved contrast.
Aspect Ratio:
16x10
Fill Factor
87%

Key Features

Video & Graphics Processing

  • HDMI 1.4 for Side by Side, Frame Packing & Top Bottom 3D Formats.

  • Dual Flash Processing can be used to multiply the displayed frame rate for 3D sources

  • Dual Pipe Processing: Two sources in parallel for Left and Right Eyes.

  • Synchronisation of active glasses.

  • 3GSDI with loop-through.

  • 24p and 1080p native display.

  • DICOM Simulation Mode.




Geometry Correction

  • Cornerstone, Vertical & Horizontal Keystone, Pincushion & Barrel, and Image Rotation.

  • Blanking control for custom input window sizing.

  • Scaling for fixed aspect ratio screens.


Edge Blending

  • Correction for non-active pixels at the edge of the display.


Picture in Picture

  • Two sources can be displayed either one within the other (PIP), or side by side, with original aspect ratios maintained.


HDBaseT® Interface

  • Built in support for transmission of uncompressed High Definition Video over standard CAT5e/6 LAN cable.

  • Allows projector to be placed up to 100m from source with low cost cabling.


Colour Processing

  • Powerful seven point colour correction for accurate colour matching.


Projector Controller Software

  • Intuitive user interface for network control

  • Simultaneous control of user-defined groups of projectors

  • At-a-glance monitoring of projector status


Projector Automation
  • Real-time clock provides daily on/off automation.

Source Compatibility:
3GSDI is SMPTE 292M, SMPTE 259M-C and SMPTE 424M compliant.
HDMI including Deep Color™ processing.
Graphics standards up to 1920 x 1200 resolution at 60Hz via HDMI, DisplayPort or VGA.
Component Video (SD and HD) via RGBHV.

Inputs/Outputs

 Video & Computer

Type

Connector

Qty

DisplayPort 1.1a
HDMI 1.4
3G-SDI in
3G-SDI out
VGA / Analog RGB
Component Video
HDBaseT
DisplayPort
HDMI
BNC
BNC
15-pin D-Sub
5 x BNC
LAN
1
2
1
1
1
1
1
 Communication & Control

Type

Connector

Qty

3D Sync Out
3D Sync In
LAN
RS232
Wired Remote
12V Trigger
Service Port
BNC
BNC
RJ45
9-pin D Sub
3.5mm Stereo Jack
3.5mm Stereo Jack
USB Type A
1
1
1
1
1
2
1

 

3D Formats Supported
HDTV Formats Supported
Frame Packing
Dual Pipe
Frame Sequential
Side By Side (half)
Top and Bottom
1080p (24Hz, 25Hz, 30Hz, 50Hz, 60Hz),1080i (50Hz, 60Hz), 720p (50, 60Hz)
Computer Compatibility Bandwidth
Up to 1920 x 1200 165 MHz on analog RGB
165 Megapixels per second on HDMI
Remote Control Automation Control
Addressable IR remote control, wireless and wired.
On-Board keypad
Crestron RoomView® Connected
PJLink
LAN
RS232
AMX (Device Discovery)
Colour Temperature Operation
User selectable from 5000 to 9300K
illumination Type
Typical illumination Life
Laser Light Source 20,000 hours
Lenses

Lens

Part No.

Optimised Focus Range*

Lens Shift

0.38 :1 fixed 117-341 0.68m - 2.44m Depends on image size, see Installation Guide.
0.75 - 0.93 :1 zoom 115-339 1.02m - 12.7m Vert: 0.5 (U) 0.3 (D) frame, Hor: 0.1(L) 0.2 (R) frame
0.76 :1 fixed 112-499 0.81m - 5.08m none
1.25 - 1.79 :1 zoom 112-500 1.33m - 11.73m Vert: 0.5 (U) 0.3 (D) frame, Hor: 0.1(L) 0.2 (R) frame
1.73 - 2.27 :1 zoom 112-501 1.83m - 14.9m Vert: 0.5 (U) 0.3 (D) frame, Hor: 0.1(L) 0.2 (R) frame
2.22 - 3.67 :1 zoom 112-502 2.36m - 24.2m Vert: 0.5 (U) 0.3 (D) frame, Hor: 0.1(L) 0.2 (R) frame
3.58 - 5.38 :1 zoom 112-503 3.8m - 35.35m Vert: 0.5 (U) 0.3 (D) frame, Hor: 0.1(L) 0.2 (R) frame
5.31 - 8.26 :1 zoom 112-504 5.59m - 54.8m Vert: 0.5 (U) 0.3 (D) frame, Hor: 0.1(L) 0.2 (R) frame

* Lens focal ranges above are the optimised distances but are likely to focus further, please contact your RSM for more details.

Lens Mount

Motorised and programmable shift, zoom and focus.
Intelligent Lens Memory with 10 user-definable preset positions (except UST lens).

Mechanical Mounting Orientation
Front/Rear Table
Front/Rear Ceiling
Adjustable Front/Rear Feet
Table Top or Inverted: Yes
Pointing Up:        Yes
Pointing Down:   Yes
Roll (Portrait):      Yes
Power Requirements Power Consumption
100-240VAC 50/60Hz single phase 880 (920 @100 Vac)W
Thermal Dissipation
Fan Noise
3000 (3137 @100 Vac) BTU/Hour 40 dBA
Operating/Storage Temperature
Operating Humidity
Operating: 0 to 40C (32 to 104F)
Storage: -20 to 60C (-4 to 140F)
10 to 90% non-condensing
Weight (Chassis Only)
Dimensions
28 kg
62 lb
L: 59.83 cm x W: 50 cm x H: 21.85 cm
L: 23.55 in x W: 19.68 in x H: 8.60 in
Safety & EMC Regulations
 
CE, FCC Class A, UL, CCC  
Accessories
Accessory Part No.
Infrared Remote (replacement)
117-780

 


*Dimensions included for reference only and are subject to change. Please download the full set of CAD files for this display for more accurate information.

Downloads  

PDF CAD Drawings

AUTOCAD Drawings

Lens CAD Drawings

User Guides

User Guides (German)

User Guides (French)

User Guides (Korean)

Laser Risk Group Document

Important Information

Control Protocol

Ultra Short Throw Lens

Ultra Short Throw Lens Installation Guide


Specifications subject to change without notice. ©2018 Digital Projection.
DLP®, Digital Light Processing™ and DMD are trademarks of Texas Instruments, Inc


map

DIGITAL PROJECTION, LTD GREENSIDE WAY, MIDDLETON MANCHESTER, UK. M24 1XX
T: +44.161.947.3300 | F: +44.161.684.7674 | www.digitalprojection.co.uk

DIGITAL PROJECTION, INC 55 CHASTAIN ROAD, SUITE 115 KENNESAW, GA. 30144
T: 770.420.1350 } F: 770.420.1360 | www.digitalprojection.com

DIGITAL PROJECTION, CHINA Rm A2301,Shaoyaoju 101 North Lane,Shi Ao International Center,Chaoyang District,Beijing 100029,PR China
T: +86.10.58239771 | F: +86 10 58239770

DIGITAL PROJECTION, ASIA 16 NEW INDUSTRIAL ROAD, #02-10 HUDSON TECHNOCENTRE SINGAPORE 536204
T: +65.6284.1138 | F: +65.6284.1238