Click to Print This Page

Digital Projection Logo

Specification Sheet


INSIGHT 4K Quad Lamp (Preliminary)

25,000 Lumens | Contrast Ratio: 2000:1 | Part Number: 115-900

25,000 Lumens | Contrast Ratio: 2000:1 | Part Number: 115-900

Colour System: DMD Specification:
3-chip DLP®

Display Type:
3 x 1.38" DarkChip™ DMD™
4096 x 2160 pixels native, +/- 12° tilt angle
Fast transit pixels for smooth greyscale and improved contrast.
Aspect Ratio:
1.90:1
Fill Factor
87%

Key Features

Video & Graphics Processing

  • Up to 60fps 4096 x 2160 pixels sequential input via single cable (Display Port 1.2)

  • 3D Capable

  • Scaling of HDMI 1.4 formats to fill the 4K display

  • Dark Time insertion capability

  • HDMI 1.4b up to 3840 x 2160 at 30 fps.

  • Dual Flash Processing can be used to multiply the displayed frame rate for 3D sources (example 144Hz display).

  • Synchronisation of active glasses or polarising switcher.



Color adjustments

  • Up to 12 bits per color processing (depending on source and input type).

  • Degamma table maps 12 bit input to 16 bit palette (R, G & B) for display.

  • Individual R, G & B lift and gain.

  • Black and White level adjustment via Brightness & Contrast control.

  • Degamma selection from a list of parametric curves.



ColorMax™

  • Accurate matching of projectors in tiled or blended applications.

  • User selection and storage of primary and secondary user defined color targets up to 7 points.



3D Functionality

  • Full 4K 3D display capability

  • Frame multiplication capability (2x, 3x) with interleaving of Left/Right repeated frames.

  • Synchronisation of active glasses or polarising switcher.

  • Adjustable Dark Time and Synch Offset for optimisation of ghosting and smooth greyscale for switching glasses and polarizers.



Projector Control

  • Keypad.

  • Wired remote control.

  • Network control via RJ45 and protocol.

  • Group Controller Application

Source Compatibility:
Graphics standards up to 4096 x 2160 at 60 fps via DisplayPort. 30 fps via HDMI.

Inputs/Outputs

 Video & Computer

Type

Connector

Qty

DisplayPort 1.2
HDMI 1.4
DisplayPort
HDMI
2
2
 Communication & Control

Type

Connector

Qty

3D Sync Out
3D Sync In
LAN
RS232
Wired Remote In
Infra-Red
BNC
BNC
RJ45
9-pin D Sub
3.5mm Stereo Jack
Front and Rear IR Receivers
1
1
1
1
1
2

 

3D Formats Supported
HDTV Formats Supported
Dual Pipe (Q3 2016)
Frame Sequential
4096 x 2160p (24, 25, 30, 50, 59.94, 60 Hz)
3840 x 2160p (24, 25, 30, 50, 59.94, 60 Hz)
1080p (24, 25, 30, 50, 59.94, 60 Hz)
Computer Compatibility Bandwidth
Up to 4096 x 2160 N/A
Remote Control Automation Control
Wired remote control
On-Board keypad
RS232
LAN
Colour Temperature Operation
Adjustable
illumination Type
Typical illumination Life
4 x 465W High Intensity Discharge Full Power: 1500 hours (up to 6000 hours in lamp sequential mode) Eco Mode : 2000 hours (up to 8000 hours in lamp sequential mode)
Lenses

Lens

Part No.

Optimised Focus Range*

Lens Shift

At Native 4K - - -
0.93:1 fixed 117-310 0.5m - 100m Vert: 0.21 (U) 0.21 (D) frame, Hor: 0.08 (L) 0.08 (R)
1.13 - 1.72:1 115-627 2.5m - 100m Vert: 0.34 (U) 0.19 (D) frame, Hor: 0.08 (L) 0.10 (R) frame
1.65 - 2.60:1 115-630 3.5m - 100m Vert: 0.40 (U) 0.20 (D) frame, Hor: 0.13 (L) 0.13 (R) frame
2.53 - 4.98:1 115-632 4.5m - 100m Vert: 0.37 (U) 0.20 (D) frame, Hor: 0.13 (L) 0.13 (R) frame
At UHD - - -
0.99:1 fixed 117-310 0.5m - 100m Vert: 0.27 (U) 0.20 (D) frame, Hor: 0.10 (L) 0.11 (R)
1.21 - 1.83:1 115-627 2.5m - 100m Vert: 0.40 (U) 0.20 (D) frame, Hor: 0.10 (L) 0.14 (R) frame
1.76 - 2.77:1 115-630 3.5m - 100m Vert: 0.45 (U) 0.20 (D) frame, Hor: 0.10 (L) 0.17 (R) frame
2.70 - 5.31:1 115-632 4.5m - 100m Vert: 0.42 (U) 0.20 (D) frame, Hor: 0.10 (L) 0.17 (R) frame

* Lens focal ranges above are the optimised distances but are likely to focus further, please contact your RSM for more details.

Lens Mount

Motorised shift, zoom and focus. Intelligent Lens Memory with user-definable preset positions.

Mechanical Mounting Orientation
Front/Rear Table
Front/Rear Ceiling
Adjustable Front/Rear Feet
Optional RapidRig™ frame with integrated pitch, roll and yaw adjustments.
Table Top or Inverted: Yes
Pointing Up:        Yes
Pointing Down:   No
Roll (Portrait):      No
Power Requirements Power Consumption
200-240VAC 50/60Hz single phase 2100WW
Thermal Dissipation
Fan Noise
7165 BTU/Hour BTU/Hour 58 dBA
Operating/Storage Temperature
Operating Humidity
Operating: 0 to 40C (32 to 104F)
Storage: -10 to 50C (14 to 122F)
20 to 80% non-condensing
Weight (Chassis Only)
Dimensions
66.3 kg
146.1 lb
H: 32.5 cm W: 70.0 cm L: 82.0 cm
H: 12.8 in W: 27.56 in L: 32.3 in
Safety & EMC Regulations
 
CE, FCC Class A  
Accessories
Accessory Part No.
RapidRig™ Frame
Replacement Filter Set
Lens Adapter Kit for 0.72:1 4K Schneider Lens
116-064
117-751
117-343

 


*Dimensions included for reference only and are subject to change. Please download the full set of CAD files for this display for more accurate information.

Downloads  

PDF CAD Drawings

AUTOCAD Drawings

Rigging Frame CAD Drawings Rigging Frame CAD Drawings

User Guides

User Guides (German)

User Guides (French)

Important Information

Control Protocol

0.72:1 Schneider Lens Assembly Guide

Projector Controller Software 4.4    User Guide


Specifications subject to change without notice. ©2018 Digital Projection.
DLP®, Digital Light Processing™ and DMD are trademarks of Texas Instruments, Inc


map

DIGITAL PROJECTION, LTD GREENSIDE WAY, MIDDLETON MANCHESTER, UK. M24 1XX
T: +44.161.947.3300 | F: +44.161.684.7674 | www.digitalprojection.co.uk

DIGITAL PROJECTION, INC 55 CHASTAIN ROAD, SUITE 115 KENNESAW, GA. 30144
T: 770.420.1350 } F: 770.420.1360 | www.digitalprojection.com

DIGITAL PROJECTION, CHINA Rm A2301,Shaoyaoju 101 North Lane,Shi Ao International Center,Chaoyang District,Beijing 100029,PR China
T: +86.10.58239771 | F: +86 10 58239770

DIGITAL PROJECTION, ASIA 16 NEW INDUSTRIAL ROAD, #02-10 HUDSON TECHNOCENTRE SINGAPORE 536204
T: +65.6284.1138 | F: +65.6284.1238